F9A Boring machine (Automatic CNC)

Short F9A Boring Machine Specifications American Metric
Control Automatic CNC
Touch Screen 4.5″ 114mm
Table – Size 50″ x 21″ 1270 x 530mm
Travel – Spindle Nose to Table 26″ 670mm
Spindle – Rotation Speed 100 to 1200 RPM
Spindle – Motor 3.3 HP 2.5kW HP
Bore Capacity (with Optional Cutterheads) 1.5″ – 5″ 38 – 127mm
Spindle Travel (Vertical) 13″ 330mm
Workhead Travel (Horizontal) 40″ 1000mm
View List

Description

Click to view F9A Boring machine (Automatic CNC)

Click to view FA & FX Optional Equipment Catalog

F9A Boring machine (Automatic CNC)

The FA Series Boring Machines are unlike anything else available to
automotive and diesel engine builders. These machines represent
the next generation of boring equipment, evolving from the Rottler
boring bar which has been the industry standard since 1923. With
improvements in electronic motors and cutting tool technology, Rottler
Boring Machines are two to three times more productive than anything
else available on the market

Standard Equipment

  • Block Clamp Arm – set of 2 (Part# 502-1-30)
  • CNC Touch Screen Control, Windows Operating System with Intel Processor
  • Internet connection to the boring bar machine computer must be provided for training support and service.
  • Automatic Vertical Cycles for Cylinder Boring, Resleeving and Counterboring
  • Programming and Machine Operation thru extra bright touch screen.
  • Electronic Handwheel for manual operation in .001″ (.01mm) or .005″ (.125mm) increments per Handwheel Detent
  • Precision Digital Readout, .0001″ (.002mm) Resolution
  • Spindle Travel by Precision Ball Screw & AC Servo Motor – Infinitely Variable
  • Vertical Movement – Z Axis – Up and Down – 13″ (330mm)
  • Spindle Rotation by AC Servo Motor – Infinitely Variable to 1200 RPM
  • Machine Workhead Floats on Air Cushion for Precision Centering controlled from the Touch Screen – Total Travel – Left/Right Direction 40″ 1000mm
  • Heavy Duty Spindle 2.68″ (68mm) Diameter with Inner Precision Angular Contact Bearings supported in Adjustable Outer Bearings
  • Quick Change Cutterhead System

Features

  • Speed – All FA boring bars have the same high performance AC servo motor. Independent feed control allows you to change the feed rate from .001″ (.025mm) to .012″ (.3mm) per revolution.
  • Accuracy – The FA series boring bar uses a precision ground ball screw to control feed rate and cutter position. This allows the machines to repeat cutter position accuracy to .0002″ (.005mm).
  • Strength – The Rottler proven spindle and bearing design gives you a rigid machine capable of making heavy sleeve cuts for a lifetime. The F9A spindle has been reduced to allow the machining of compact engines such as motorcycles, marine blocks and others.
  • Flexibility – With variable feed rates you are able to maximize the performance of the machine. Increase spindle feed rates for simple oversize bores. Decrease feed rates for sleeve cuts or counter bores. The F9A machines can bore from 1.5″ (38mm) to 5″ (127mm). Special carbide tools are available for counterboring, chamfer cutting, offset boring, and O-ringing.
  • Reliability – The F Series machines use a high-speed, cogged belt drive system. This and the use of two independent motors to run the spindle speed and feed, entirely eliminates the gear box.
  • Cost Savings – The high speed Rottler FA boring bar series machine can bore a block in half the time that other boring machines require. New insert technology is producing long lasting, inexpensive inserts which are capable of handling these high speed and feed rates, with the same cost per insert as previous styles. Inserts do not require sharpening and the low cost of these tools makes them the ultimate choice for boring cylinders.

 

Full F9A Boring Machine Specifications American Metric
Control Automatic CNC
Touch Screen 4.5″ 114mm
Machine Height 80″ 2032mm
Table – Size 50″ x 21″ 1270 x 530mm
Travel – Spindle Nose to Table 26″ 670mm
Spindle – Rotation Speed 100 to 1200 RPM
Spindle – Motor 3.3 HP 2.5kW HP
Bore Capacity (with Optional Cutterheads) 1.5″ – 5″ 38 – 127mm
Feed per Revolution Programmable Feed Rates .001″ – .012″ Programmable Feed Rates .025 – .300mm
Spindle Travel (Vertical) 13″ 330mm
Workhead Travel (Horizontal) 40″ 1000mm
Dimensions – Machine 45D x 51W x 80″ H 1143D x 1956W x 2032mm H
Dimensions – Floor Space Requirements 46D x 54W” 1170D x 1372Wmm
Dimensions – Shipping 78D x 93W x 93″ H 1854D x 2362W x 2362mm H
Machine Weight 3700 lbs 1678 kg
Electrical Requirements 208-240V, 30A, 50/60Hz, 1Ph
Air Requirements 1 cfm @ 90 psi 28 l/min @ 6 bar
Paint Color Code RAL9002 (Grey White)

—————————————

Picture of the products may not correspond to the appearance, color, composition or shape of the goods and their packaging.

The information in the product description is general and may not match the information on the product packaging.

The data provided on the balance of goods and prices in some cases may differ from the actual price of the goods and their balances in the store.

Brand

Rottler